Skip to Content
Need some help with Loomis—Pay?
Welcome to our Help Center
Getting the E800 ready
To pair the E800 and A35, follow these steps:
For the E800:
Turn on the terminal and start up the POS system. Tap on the little man icon in the bottom right corner. (This step is only necessary for Complimenta or self-service customers.)
Tap the gear symbol.
If a password is required, use either 9876, pax9876@@, or PaX2022!
Tap 'Wifi' and turn it on.
Select your wifi network and enter the password. Wait for the connection to establish.
Tap 'back' at the bottom of the screen.
Please note that the next step should be taken only after the A35 (the small terminal) has been set up.
**Refer to the separate guide for this.
**
Tap on the little man icon in the bottom right corner again and enter your PIN code (1234). Press 'Log-In'. (This is only valid for Complimenta and self-service terminals.)
Press 'Start Checkout' and then 'Skip'. (This will set the contact inventory to 0 in the system.)
Tap the 3 bars in the top left corner and select 'Settings'. Re-enter your PIN (1234).
Tap 'Start Pairing' under 'External Credit Card Terminal'.
Tap 'Scan QR Code'.
Scan the QR code that is displayed on the small terminal (A35) using the front-facing camera of the large terminal.
Your terminals are now linked and ready to accept payments.